We have just launched our website on a new platform. If you have any issues please contact cleanheat@tutco.com for assistance.
Series III Spot Heaters
Series heaters are general purpose compact electric air heaters using Serpentine wire heating elements within a Quartz open-end ( Style A ) or nozzle ( Style B ) for spot heating applications. The Series products are typically powered by open-loop ( manual ) power controllers. The air inlet is a high-temperature silicone rubber adapter with male spade power connectors and a ground. Mounting in existing or new equipment is easy using the grounding bracket. Air is typically supplied by compressed lines.
Product Specs
Maximum Temperature.......................................................................................1600ºF (871ºC)
Controller............................................................................................Manual Voltage Regulator
Tube Material...........................................................................................................Clear Quartz
Temperature/SCFM.......................................................................600 SCFM @ 825ºF (441ºC)
Info
Stainless Steel outer shields available
Minimizing Series Element Failures
- Always ensure air is flowing before powering the heating element
- Slowly regulate the ramp up time using the potentiometer to control AC voltage
Products
| F017558 Length "A" | 6.88" (175mm) |
| F017575 Length "A" | 7.88" (200mm) |
| Series III Diameter "B" | .59" (15mm) |
Resources
Compatible Heater Controls
Series III Heaters (F017575) 1450W 135V
Series III Heaters (F017558) 2050W 160V