We have just launched our website on a new platform. If you have any issues please contact cleanheat@tutco.com for assistance.
Series II Spot Heaters
Series heaters are general purpose compact electric air heaters using Serpentine wire heating elements within a Quartz open-end ( Style A ) or nozzle ( Style B ) for spot heating applications. The Series products are typically powered by open-loop ( manual ) power controllers. The air inlet is a high-temperature silicone rubber adapter with male spade power connectors and a ground. Mounting in existing or new equipment is easy using the grounding bracket. Air is typically supplied by compressed lines.

Product Specs
Maximum Temperature.......................................................................................1400ºF (760ºC)
Controller............................................................................................Manual Voltage Regulator
Tube Material...........................................................................................................Clear Quartz
Temperature/SCFM.......................................................................300 SCFM @ 1000ºF (538ºC)
Info
Stainless Steel outer shields available
Minimizing Series Element Failures
- Always ensure air is flowing before powering the heating element
- Slowly regulate the ramp up time using the potentiometer to control AC voltage


Products
F016503 Length "A" | 3.88" (98mm) |
F016504 Length "A" | 4.88" (124mm) |
F016502 Length "A" | 4.88" (124mm) |
F016501 Length "A" | 3.88" (98mm) |
Series II Diameter "B" | .41" (10mm) |



Resources
Compatible Heater Controls
Series II Heaters (F016503) 850W 80V
Series II Heaters (F016504) 650W 70V
Series II Heaters (F016502) 600W 95V
Series II Heaters (F016501) 1130W 130V