Share this Article
Heaters for Combustion Test Facilities
Thu, December 27, 2018
Emissions, such as Nitrogen Oxide (NOx), are highly regulated by the International Civil Aviation Organization (ICAO). Emission reduction has been a key focus for the ICAO as they regularly reviewing and tightening regulations.
Facilities require air heater test stands that can simulate the inside of an engine to accurately measure the emissions produced. A high degree of control is required in efforts to measure and reduce the amount of Nitrogen Oxide (NOx) emissions based on the inlet air temperature. This very sensitive ratio requires a high degree of accuracy to measure the composition of exhaust gases based on a set temperature and pressure equal to conditions produced during combustion. Tutco SureHeat specialty flanged inline electric air heaters will provide quick and accurate temperature control within 2° increments at high-temperature and pressure needed for today's combustion testing. Click here to learn more about our specialty flanged inline heaters.
Custom Threaded Inline Heaters If a standard threaded inline heat solutions is not suitable for your application, we can provide a custom inline solution to meet your high temperature/high pressure needs.
Specialty Flanged Inline Heaters Tutco SureHeat Specialty Flanged Inline (SFI) Heaters deliver safe, precise, and durable performance in a wide-range of extremely demanding high-temperature, high-pressure and low-flow applications.